The Muraena bench is available in two configurations: a mobile version on wheels, to be used with any two-post lift or with a scissor lift (4.5 or 6.0 Tons).
On both models it is possible to mount different series of sill clamps (both universal and specific) and two types of pull posts: Muraena or Piranha. Naturally both models are predisposed to fit on the crossbeams the Universal Jig system and the Electronic measuring instrument Contact Evolution.
SCISSOR LIFT CONFIGURATION
The bench combined with a special scissor lift is mobile and inclinable on both ends. Its dimensions have been optimized to allow the maximum accessibility, both inside and outside the frame during the entire repair process in order to work in an efficient ergonomics approach. Its technical specifications enable the end-user to carry out re-alignment operations when repairing passenger’s cars, light commercial and off-road vehicles while maintaining a comfortable working posture. The frame is manufactured using a high tensile steel box-section which is milled to ensure a precise positioning of the checking points. It can be fitted with one or more Muraena or Piranha pull posts positioned, also very close to each other. Approach ramps and side runners thanks to their specific design allow the loading on board of vehicle without dismantling the basic equipment.
TECHNICAL FEATURES
| Mobile benches with Muraena frame | ||
| Bench Lenght | 4,5 m (15') | 5,2 m (17') |
| Frame weight | 940 Kg | 1090 Kg |
|
Scissor lifts with Muraena frames |
4,5 Ton. load capacity (9,920 lb) |
6,0 Ton. load capacity (13,300 lb) |
||
|
Bench Length |
4,5 m (15') |
5,2 m (17') |
5,2 m (17') |
|
|
Min. lifting height |
320 mm (1') |
320 mm (1') |
||
|
Max. lifting height from working area |
1800 mm (5' 90") |
1800 mm (5' 90") |
||
|
Weight of lift with frame |
1,60 ton. |
1,70 ton. |
1,70 ton. |
|
|
Nominal Power |
2 Kw |
2 Kw |
||
|
Nominal Voltage |
380 V |
380 V |
||
|
Nominal Current |
4,3 A |
4,3 A |
||
|
Nominal Frequency |
50 Hz |
50 Hz |
||
|
Max pressure when lifting |
280 Bar |
280 Bar |
||
|
Max pressure when lowering |
130 Bar |
130 Bar |
||
|
Hydraulic Oil |
Shell Tellus Oil HM 46 or with compatible viscosity |
|||
|
Weight of electrohydraulic control unit |
60 Kg |
|||
| Pull posts | Muraena |
Piranha |
|
|
Pulling power |
12 ton. |
10 ton. |
|
|
Pushing power |
12 ton. |
- |
|
